Wolf Icon Q 3 Rod Set & Qr

Wolf's new ICON Q series alarm system and the Qr receiver are characterized by military-grade electronics, advanced functions and many new details. The design process was an intense process that took years to develop every feature of the ICON alarm and receiver. It has a wide range of features listed above. It is a fully sealed, weatherproof electronic system with stealth and mute modes, manufactured to military-grade standards. This system is designed for three rods . Variable Detection System - VDS: Using a magnetic vibration sensor, the VDS generates a signal that responds directly to line movement. Movement is detected in two ways: by the roller wheel (S) or by vibration (V). The sensitivity can be adjusted differently. Ultra-sensitive vibration detection: The V-Control overrides the line wheel so that the VDS can now detect even the smallest movements. This is perfect when fishing slack lines in search of "liner" or when fishing very tight lines where a strike is often preceded by a beep or two before any discernible movement is detected. Wheel Detection: Automatic detection system that switches between motion and roller wheel detection to ensure you never miss that all-important bite. Eight levels of sensitivity (can also be controlled from the receiver). They are adjusted with the S-knob reel between the minimum sensitivity setting of 100mm (ideal for running water), and the maximum setting which detects line movement as little as 2mm, making them ideal for timid or suspicious fish. Qr HUBB Link - Receives & sends commands to HUBB receiver - up to 16 levels allowing adjustment up to 300mm (2mm, 6mm, 12mm, 18mm, 25mm, 35mm, 60mm, 100mm & *Additional Qr HUBB adjustments 4mm , 8mm, 16mm, 20mm, 30mm, 40mm, 80mm & 300mm). Extreme transmission / reception range. Drop Bite Alert: The alarm only sounds when the line moves the distance set with the sensitivity control in one direction only. If it moves forward and then falls back immediately, such as in wind, the alarm will not sound, ie at certain distances more than 4mm of cord movement in the opposite direction is required before an alarm is sounded. LEDs: Highly visible LEDs in 7 selectable colors - green, blue, cyan, yellow, magenta, white or red. LEDs light up when the line is pulled and flash when the line is dropped. Controllable from the Hubb receiver, because the alarm time of the LEDs can be set: 60 seconds - 30 seconds - 20 seconds - 10 seconds - 5 seconds. Night light: In 7 selectable colors (can be controlled from the receiver), twilight sensor adjusts night light intensity to the ambient brightness, night time can be set to 30 seconds via HUBB. Bite Alarm Port: Smart LED Drive, changes color according to the signal and the IQ Port: connects other ICON accessories

Setting: Mute of 30 seconds, so no noise when putting down the rod, power-off alarm, ie guaranteed anti-theft protection, volumes & sound settings, adjustable via bite alarm & receiver and different tones for run & fall bite

Fully sealed waterproof electronics with low battery indicator (accessible via receiver), secure rubber rod rest, 2 Beta-Light slots (2 x 6mm), rubber socket covers, battery saver mode when used without receiver, shockproof and dustproof, instruction manual and 3 year guarantee (with free product registration 4 years). Hard case for safe transport with Auto ON/OFF - bite alarm automatically switches off the Qi when packing The receiver of the future.....is that too bold a statement? We don't think so. Like the entire Wolf Icon range, the Qr receiver is designed and manufactured in the UK. It's not just a receiver that repeats what the alarms tell you, it's also a controller and transmitter.